| Issue |
EPJ Nuclear Sci. Technol.
Volume 11, 2025
Euratom Research and Training in 2025: ‘Challenges, achievements and future perspectives’, edited by Roger Garbil, Seif Ben Hadj Hassine, Patrick Blaise, and Christophe Girold
|
|
|---|---|---|
| Article Number | 38 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/epjn/2025031 | |
| Published online | 24 July 2025 | |
- SNETP, Additive Manufacturing for Nuclear Applications. Available: https://snetp.eu/wp-content/uploads/2021/02/Presentation_Pascal-Aubry.pdf [Google Scholar]
- IAEA, Embracing the Promise of Additive Manufacturing for Advanced Nuclear Reactors. Available: https://www.iaea.org/bulletin/embracing-the-promise-of-additive-manufacturing-for-advanced-nuclear-reactors [Google Scholar]
- J. Muñoz, G. Leopold, M. Bourgeois, NUCOBAM Project, Nuclear Components Based on Additive Manufacturing, PVP2024-122057, Proceedings of the ASME 2024 Pressure Vessels & Piping® Conference July 28 – August 2, 2024, Bellevue, WA, USA (2024)https://doi.org/10.1115/PVP2024-122057 [Google Scholar]
- T. Guillemin, The NUCOBAM Project: Qualification and evaluation of nuclear components manufactured by additive manufacturing, in Proceedings of the European Nuclear Young Generation Forum ENYGF’25 June 2–6, 2025, Zagreb, Croatia (2025) [Google Scholar]
- J. Quibel, et al. Fatigue behaviour in air of 316L stainless steel obtained by additive manufacturing in the frame of the nucobam european project, PVP2024-123296, in Proceedings of the ASME 2024 Pressure Vessels & Piping® Conference July 28 – August 2, 2024, Bellevue, WA, USA (2024), https://doi.org/10.1115/PVP2024-123296 [Google Scholar]
- M.J. Konstantinović, D. Bardel, W. Van Renterghem, et al., Mechanical properties of neutron irradiated 316L stainless steel additively manufactured by laser powder bed fusion: Effect of post-manufacturing heat treatments, J. Nucl. Mater. 607, 155662 (2025) [Google Scholar]
- R. Misler, et al., Performance assessment of additive manufacturing components for an ex-core nuclear user: valve component – NUCOBAM project, PVP2024 – 123236, in Proceedings of the ASME 2024 Pressure Vessels & Piping Conference PVP2024 July 29-August 2, 2024, Bellevue, Washington (2024) [Google Scholar]
- R. Misler, et al., Some challenges regarding qualification of additive manufacturing components for a nuclear use – NUCOBAM project, PVP2024 – 123276, in Proceedings of the ASME 2024 Pressure Vessels & Piping Conference PVP2024 July 29-August 2, 2024, Bellevue, Washington (2024) [Google Scholar]
- Available: https://nucobam.eu/ [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.