Issue |
EPJ Nuclear Sci. Technol.
Volume 8, 2022
|
|
---|---|---|
Article Number | 13 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/epjn/2022012 | |
Published online | 09 August 2022 |
https://doi.org/10.1051/epjn/2022012
Regular Article
Radioactivity and health risk assessments in cement samples commonly used as construction materials in the case of South Gondar Zone, Ethiopia
Department of Physics, Debre Tabor University, P.O. Box 272 Debre Tabor, Ethiopia
* e-mail: tadesseabate96@gmail.com
Received:
26
February
2022
Received in final form:
4
April
2022
Accepted:
22
June
2022
Published online: 9 August 2022
This work deals with the measurement of the radioactivity concentrations from different cement samples collected from the South Gondar Zone, Ethiopia. The measurement of naturally occurring radioisotopes and radiation health impact indices caused by these nuclides in cement samples are indisputable in the dwellings. Specifically, the average concentrations for 226Ra, 232Th and 40K were estimated as 76.53, 81.67, and 407 Bq kg−1, respectively. It was seen that all the measured mean values were greater than the world’s limited levels. External and internal hazard indices are calculated as defined by the European Commission from the corresponding concentrations of 226Ra, 232Th and 40K nuclides. Moreover, the natural radionuclides have variety of concentrations which must be caused by the types of raw materials used in the industries for the production of cement.
© T. Abate, Published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.