EPJ Nuclear Sci. Technol.
Volume 6, 2020
Euratom Research and Training in 2019: challenges, achievements and future perspectives
Article Number 39
Number of page(s) 9
Section Part 1: Safety research and training of reactor systems
Published online 05 May 2020
  1. L.E. Herranz, T. Lind, K. Dieschbourg, E. Riera, S. Morandi, P. Rantanen, M. Chebbi, N. Losch, PASSAM State-of-the-art report − Technical Bases for Experimentation on Source Term Mitigation Systems, PASSAM-THEOR-T04 [D2.1], 2013 [Google Scholar]
  2. T. Albiol, L. Herranz, E. Riera, C. Dalibart, T. Lind, A. Del Corno, T. Kärkelä, N. Losch, B. Azambre, C. Mun, L. Cantrel, PASSAM final synthesis report, PASSAM– DKS-T28 [D5.5], 2017 [Google Scholar]
  3. PASSAM Final Workshop on source term mitigation of severe accidents, Paris (France), 28 February-1 March, 2017 [Google Scholar]
  4. X. Gaus-Liu, A. Miassoedov, C. Peng, The outcome of the ALISA Project: Access to Large Infrastructures of Severe Accident in Europe and in China, in Proceedings of the 9TH European Review Meeting on Severe Accident Research (ERMSAR 2019), Czech Republic , 18–20 March, 2019, Paper No. 90 [Google Scholar]
  5. B. Fluhrer et al., Main outcomes of the European SAFEST project towards a pan-European Lab on Corium behaviour in severe accidents, in Proceedings of the 9TH European Review Meeting on Severe Accident Research (ERMSAR 2019), Czech Republic , 18–20 March, 2019, Paper No. 89 [Google Scholar]
  6. J.P. Van Dorsselaere, A. Auvinen, D. Beraha, P. Chatelard, L.E. Herranz, C. Journeau, W. Klein-Hessling, I. Kljenak, A. Miassoedov, S. Paci, R. Zeyen, Recent severe accidents research: synthesis of the major outcomes from the SARNET network, Nucl. Eng. Des. 291 , 19 (2015) [CrossRef] [Google Scholar]
  7. P. Chatelard, S. Belon, L. Bosland, L. Carénini, O. Coindreau, F. Cousin, C. Marchetto, H. Nowack, L. Piar, Main modelling features of the ASTEC V2.1 major version, Ann. Nucl. Energy 93, 83 (2016) [CrossRef] [Google Scholar]
  8. H. Nowack, P. Chatelard, L. Chailan, S. Hermsmeyer, V.H. Sanchez, L.E. Herranz, CESAM- Code for European Severe Accident Management, EURATOM project on ASTEC improvement, Ann. Nucl. Energy 116 , 128 (2018) [CrossRef] [Google Scholar]
  9. F. Fichot, L. Carenini, J.M. Bonnet, Main physical questions raised by in-vessel melt retention, in International Workshop on In-Vessel Retention, Aix-en-Provence, France , 6–7 June 2016 [Google Scholar]
  10. L. Carénini, F. Fichot, N. Seignour, Modeling issues related to molten pool behaviour in case of In-Vessel Retention Strategy, in Proceedings of ERMSAR conference, Warsaw , 2017 [Google Scholar]
  11. J. Venker, Development and validation of models for simulation of supercritical carbon dioxide brayton cycle and application to self-propelling heat removal systems in boiling water reactors, University of Stuttgart, IKE2-156, 2015 [Google Scholar]
  12. J. Venker, A passive heat removal retrofit for BWRs, Nucl. Eng. Int. 58 , 14 (2013) [Google Scholar]
  13. F.-K. Benra, D. Brillert, O. Frybort, P. Hajek, M. Rohde, S. Schuster, M. Seewald, J. Starflinger, A supercritical CO2 low temperature Brayton-Cycle for residual heat removal, in The Fifth International Symposium — Supercritical CO2 Power Cycles, San Antonio, TX, Mar. 28-31 , 2016, pp. 1–12 [Google Scholar]
  14. J. Starflinger, M. Straetz, A. Hacks, D. Brillert, A. Vojacek, P. Hajek, The supercritical CO2 heat removal system − status and outlook, 12th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-12) Qingdao, China, October 14–18 , 2018 [Google Scholar]
  15. T. Lind, N. Losch, L. Herranz, C. Mun, S. Morandi, Advances on understanding of pool scrubbing for FCVS based on the PASSAM project, in IAEA: I3-TM- 5012 2 Technical Meeting on Severe Accident Mitigation, Vienna, 31 August-3 September 2015 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.