Microstructure and mechanical properties relationship of additively manufactured 316L stainless steel by selective laser melting
EPJ Nuclear Sci. Technol., 5 (2019) 23
Published online: 2019-12-19
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Influence of Spatter on Porosity, Microstructure, and Corrosion of Additively Manufactured Stainless Steel Printed Using Different Island Size
Venkata Bhuvaneswari Vukkum, Taylor Sanborn, John Shepherd, Sourabh Saptarshi, Rakesh Basu, Timothy Horn and Rajeev Kumar GuptaCrystals 14 (4) 328 (2024)
https://doi.org/10.3390/cryst14040328
Temporal modulation of the laser emission power for microstructural manipulation in powder bed fusion
Leonardo Caprio, William Reynolds, Ali Gökhan Demir, Adam Clare and Barbara PrevitaliJournal of Materials Processing Technology 330 118448 (2024)
https://doi.org/10.1016/j.jmatprotec.2024.118448
Combined effect of surface treatment and heat treatment on the fatigue properties of AISI 316L, manufactured by powder bed fusion of metals using a laser (PBF-LB/M)
Johannes Diller, Jakob Blankenhagen, Dorina Siebert, Christina Radlbeck and Martin MensingerInternational Journal of Fatigue 178 108025 (2024)
https://doi.org/10.1016/j.ijfatigue.2023.108025
Corrosion behavior of Ta and TiN double-layer-coated SUS316L for PEMFC bipolar plates using plasma-enhanced atomic layer deposition and magnetron sputtering
Yujae Jang, Yangjae Kim, Wonyeop Jeong, Suhyuk Ko, Daniel Gil, Inyoung Jeong, MyungSeok Lee, Sangbong Ryu, Kye Hwan Jang and Suk Won ChaJournal of Alloys and Compounds 977 173379 (2024)
https://doi.org/10.1016/j.jallcom.2023.173379
Multiscale characterisation study on the effect of heat treatment on the microstructure of additively manufactured 316L stainless steel
Benjamin M. Jenkins, Auriane Etienne, Eric Baustert, Gregory Rose, Cristelle Pareige, Philippe Pareige and Bertrand RadiguetMaterials Today Communications 39 108849 (2024)
https://doi.org/10.1016/j.mtcomm.2024.108849
Investigation on activation characterization, secondary electron yield, and surface resistance of novel quinary alloy Ti–Zr–V–Hf–Cu non-evaporable getters
Kaan Yigit, Jie Wang, Qingyu Si, Xin Du, Qiuyu Sun, Yinqiao Zhang, Zhifeng Li and Sheng WangReview of Scientific Instruments 95 (6) (2024)
https://doi.org/10.1063/5.0198398
151 677 (2024)
https://doi.org/10.1007/978-3-031-49413-0_51
Development of ferritic–austenitic functionally graded structure via twin wire arc additive manufacturing route
Ashish Yadav, Manu Srivastava, Prashant K. Jain and Farooz Ahmad NajarProgress in Additive Manufacturing (2024)
https://doi.org/10.1007/s40964-024-00823-6
Comparative Analysis of Mechanical Properties: Conventional vs. Additive Manufacturing for Stainless Steel 316L
Constantin Alex Sumanariu, Cătălin Gheorghe Amza, Florin Baciu, Mihai Ion Vasile and Adrian Ionut NicoaraMaterials 17 (19) 4808 (2024)
https://doi.org/10.3390/ma17194808
Regression analysis and optimization of direct energy deposition parameters for functionally graded 316L stainless steel-tungsten carbide coatings
Takudzwa Lewis Tendere, Natasha Sacks and W. du PreezMATEC Web of Conferences 388 03003 (2023)
https://doi.org/10.1051/matecconf/202338803003
Microstructure – Toughness relationships in 316L stainless steel produced by laser powder bed fusion
Edouard de Sonis, Sylvain Dépinoy, Pierre-François Giroux, Hicham Maskrot, Pierre Wident, Olivier Hercher, Flore Villaret and Anne-Françoise Gourgues-LorenzonMaterials Science and Engineering: A 877 145179 (2023)
https://doi.org/10.1016/j.msea.2023.145179
Dynamic recrystallization behavior of selective laser melted 316L stainless steel
Zahra Abbasi and Hamid Reza AbediJournal of Materials Research and Technology 27 6458 (2023)
https://doi.org/10.1016/j.jmrt.2023.11.120
On the origin of grain refinement and twin boundaries in as-fabricated austenitic stainless steels produced by laser powder bed fusion
Léo Monier, Maxence Buttard, Muriel Veron, Jean-Jacques Blandin, Guilhem Martin, Flore Villaret, Yang Shen, Bernard Yrieix, Clément Ernould, Julien Guyon and Arthur DespresAdditive Manufacturing 61 103351 (2023)
https://doi.org/10.1016/j.addma.2022.103351
Impact of intragranular misorientation on void swelling and inter-granular cavities after ion irradiation in standard and additive manufacturing 316L austenitic steels
Marie Loyer-Prost, Anne-Hélène Puichaud, Camille Flament, E. Rouesne and Jean-Luc BéchadeJournal of Nuclear Materials 573 154102 (2023)
https://doi.org/10.1016/j.jnucmat.2022.154102
Investigation of surface properties for additively manufactured SS316L parts: Effect of post-processing techniques
Pankaj Sahlot, Mohit Suthar and Vishal Ashok WankhedeMaterials Today: Proceedings 80 395 (2023)
https://doi.org/10.1016/j.matpr.2022.10.187
能量密度对抗氢钢HR-2激光选区熔化成形件组织及力学性能的影响
刘宁昭 Liu Ningzhao, 王国伟 Wang Guowei, 秦煜 Qin Yu, 王开甲 Wang Kaijia and 沈显峰 Shen XianfengLaser & Optoelectronics Progress 60 (7) 0714008 (2023)
https://doi.org/10.3788/LOP220477
High throughput structure–property relationship for additively manufactured 316L/IN625 alloy mixtures leveraging 2-step Bayesian estimation
Venkata Surya Karthik Adapa, Nicolas P. Leclerc, Aditya Venkatraman, Thomas Feldhausen, Surya R. Kalidindi and Christopher J. SaldanaMaterials & Design 229 111892 (2023)
https://doi.org/10.1016/j.matdes.2023.111892
Fine-grained microstructure without texture obtained by electron beam powder bed fusion for AISI 304 L-based stainless steel
Christina Burkhardt, Marco Wendler, Robert Lehnert, Michael Hauser, Philipp Clausnitzer, Olena Volkova, Horst Biermann and Anja WeidnerAdditive Manufacturing 69 103539 (2023)
https://doi.org/10.1016/j.addma.2023.103539
Numerical modeling of oxide particle evolution during additive manufacturing
Du-Rim Eo, Seong-Gyu Chung, JeongHo Yang, In-Ho Jung and Jung-Wook ChoAdditive Manufacturing 51 102631 (2022)
https://doi.org/10.1016/j.addma.2022.102631
Review on corrosion performance of laser powder-bed fusion printed 316L stainless steel: Effect of processing parameters, manufacturing defects, post-processing, feedstock, and microstructure
V.B. Vukkum and R.K. GuptaMaterials & Design 221 110874 (2022)
https://doi.org/10.1016/j.matdes.2022.110874
Revealing the Nature of Melt Pool Boundaries in Additively Manufactured Stainless Steel by Nano‐Sized Modulation
Konstantin Sommer, Leonardo Agudo Jácome, René Hesse and Dirk BettgeAdvanced Engineering Materials 24 (6) (2022)
https://doi.org/10.1002/adem.202101699
Microtextural Characterization of Additively Manufactured SS316L After Hot Isostatic Pressing Heat Treatment
Kanwal Chadha, Yuan Tian, John Spray and Clodualdo AranasMetals and Materials International 28 (1) 237 (2022)
https://doi.org/10.1007/s12540-021-01046-y
A comprehensive investigation on application of machine learning for optimization of process parameters of laser powder bed fusion-processed 316L stainless steel
Sulaymon Eshkabilov, Ismat Ara and Fardad AzarmiThe International Journal of Advanced Manufacturing Technology 123 (7-8) 2733 (2022)
https://doi.org/10.1007/s00170-022-10331-y
The optimisation of hot isostatic pressing treatments for enhanced mechanical and corrosion performance of stainless steel 316L produced by laser powder bed fusion
I.S. Grech, J.H. Sullivan, R.J. Lancaster, J. Plummer and N.P. LaveryAdditive Manufacturing 58 103072 (2022)
https://doi.org/10.1016/j.addma.2022.103072
Bragg edge tomography characterization of additively manufactured 316L steel
Matteo Busi, Efthymios Polatidis, Florencia Malamud, et al.Physical Review Materials 6 (5) (2022)
https://doi.org/10.1103/PhysRevMaterials.6.053602
Influence of laser powder bed fusion processing parameters on corrosion behaviour of 316L stainless steel in nitric acid
Beatriz Puga, Fernando Lomello, Emeline Boussac, et al.Metallurgical Research & Technology 119 (5) 523 (2022)
https://doi.org/10.1051/metal/2022079
Investigation on elastic properties and unconventional plasticity of 316L stainless steel processed by selective laser melting technology
Ismat Ara, Sulaymon Eshkabilov, Fardad Azarmi, Igor Sevostianov and Xiangqing W. TangpongProgress in Additive Manufacturing 7 (6) 1169 (2022)
https://doi.org/10.1007/s40964-022-00291-w
Comparative study of mechanical properties of 316L steel samples made on the ALFA-150 machine in compliance with world analogues
G. A. Kononenko, S. V. Adjamsky, R. V. Podolskyi, O. A. Safronova and E. A. ShpakFundamental and applied problems of ferrous metallurgy 36 370 (2022)
https://doi.org/10.52150/2522-9117-2022-36-370-378
Simulating Pitting Corrosion in AM 316L Microstructures Through Phase Field Methods and Computational Modeling
Patrick T. BrewickJournal of The Electrochemical Society 169 (1) 011503 (2022)
https://doi.org/10.1149/1945-7111/ac4935
Microstructure and Mechanical Properties of Wire Arc Additively Manufactured Bimetallic Structure of Austenitic Stainless Steel and Low Carbon Steel
Laukik P. Raut and Ravindra V. TaiwadeJournal of Materials Engineering and Performance 31 (10) 8531 (2022)
https://doi.org/10.1007/s11665-022-06856-8
Investigating Microstructure and Properties of 316L Stainless Steel Produced by Wire-Fed Laser Metal Deposition
Nicholas Brubaker, Hussam Ali, Sandeep Dhakal, et al.Journal of Materials Engineering and Performance 31 (5) 3508 (2022)
https://doi.org/10.1007/s11665-021-06477-7
An experimental investigation into influences of build orientation and specimen thickness on quasi-static and dynamic mechanical responses of Selective Laser Melting 316L Stainless Steel
H. Carassus, J.D. Guérin, H. Morvan, et al.Materials Science and Engineering: A 835 142683 (2022)
https://doi.org/10.1016/j.msea.2022.142683
The effect of printing parameters on sintered properties of extrusion-based additively manufactured stainless steel 316L parts
Waqar Hassan, Muhammad Asad Farid, Anna Tosi, Kedarnath Rane and Matteo StranoThe International Journal of Advanced Manufacturing Technology 114 (9-10) 3057 (2021)
https://doi.org/10.1007/s00170-021-07047-w
Micromechanisms of Deformation and Fracture in Porous L-PBF 316L Stainless Steel at Different Strain Rates
Nataliya Kazantseva, Pavel Krakhmalev, Mikael Åsberg, et al.Metals 11 (11) 1870 (2021)
https://doi.org/10.3390/met11111870
Fundamentals of Laser Powder Bed Fusion of Metals
Pavel Krakhmalev and Nataliya KazantsevaFundamentals of Laser Powder Bed Fusion of Metals 215 (2021)
https://doi.org/10.1016/B978-0-12-824090-8.00018-4
Crystallographic orientation dependence of Charpy impact behaviours in stainless steel 316L fabricated by laser powder bed fusion
Xianglong Wang, Oscar Sanchez-Mata, Sıla Ece Atabay, et al.Additive Manufacturing 46 102104 (2021)
https://doi.org/10.1016/j.addma.2021.102104
Effect of Hot Isostatic Pressing on Porosity and Mechanical Properties of 316 L Stainless Steel Prepared by the Selective Laser Melting Method
Tomas Cegan, Marek Pagac, Jan Jurica, Katerina Skotnicova, Jiri Hajnys, Lukas Horsak, Kamil Soucek and Pavel KrpecMaterials 13 (19) 4377 (2020)
https://doi.org/10.3390/ma13194377