EDP Sciences logo
Submit your paper
Sciengine logo
Search
Menu
All issues Volume 12 (2026) EPJ Nuclear Sci. Technol., 12 (2026) 21 References
Open Access
Issue
EPJ Nuclear Sci. Technol.
Volume 12, 2026
Article Number 21
Number of page(s) 10
DOI https://doi.org/10.1051/epjn/2026013
Published online 26 June 2026
  1. A. Alonso, Safety regulations for nuclear power plant life management and licence renewal, in Understanding and Mitigating Ageing in Nuclear Power Plants: Materials and Operational Aspects of Plant Life Management (PLIM) (2010), pp. 56–87 [Google Scholar]
  2. A.C. Grégoire, T. Haste, Material release from the bundle in Phébus FP, Ann. Nucl. Energy 61, 63 (2013) [Google Scholar]
  3. D.S. Gomes, R.O.R. Muniz, C. Giovedi, Improving performance with accident tolerant-fuels, in International Nuclear Atlantic Conference – INAC 2017 (Associação Brasileira de Energia Nuclear – ABEN, Belo Horizonte, 2017) [Google Scholar]
  4. Z. Karoutas, J. Brown, A. Atwood, L. Hallstadius, E. Lahoda, S. Ray, J. Bradfute, The maturing of nuclear fuel: Past to accident tolerant fuel, Prog. Nucl. Energy 102, 68 (2018) [Google Scholar]
  5. H.-G. Kim, J.-H. Yang, W.-J. Kim, Y.-H. Koo, Development status of accident-tolerant fuel for light water reactors in Korea, Nucl. Eng. Technol. 48, 1 (2016) [Google Scholar]
  6. A.G. Sowder, Challenges and Opportunities for Commercialization of Enhanced Accident Tolerant Fuel or Light Water Reactors: A Utility-Informed Perspective (International Atomic Energy Agency (IAEA), 2016) [Google Scholar]
  7. J. Strumpell, Enhanced Accident-Tolerant Fuel (EATF) (Nuclear Energy Agency of the OECD (NEA), 2013) [Google Scholar]
  8. I.W. Ngarayana, R. Langenati, A. Rohanda, M. Subhan, A. Khakim, M.H. Kusuma, G.K. Suryaman, G. Rahmadi, O. Buana, M.I. Bayquni, I. Abdurrosyid, A. Purwaningsih, N. Shabrina, D. Intaningrum, I.D. Junianto, S. Santosa, S.S. Wibowo, D. Hariyanto, Exploring the effects of Al and Si dopants on the accident tolerant fuels of UO2 pellets for light water reactor, Nucl. Eng. Des. 418, 112902 (2024) [Google Scholar]
  9. J.-C. Brachet, I. Idarraga-Trujillo, M.L. Flem, M.L. Saux, V. Vandenberghe, S. Urvoy, E. Rouesne, T. Guilbert, C. Toffolon-Masclet, M. Tupin, C. Phalippou, F. Lomello, F. Schuster, A. Billard, G. Velisa, C. Ducros, F. Sanchette, Early studies on Cr-Coated Zircaloy-4 as enhanced accident tolerant nuclear fuel claddings for light water reactors, J. Nucl. Mater. 517, 268 (2019) [Google Scholar]
  10. J. Carmack, F. Goldner, S.M. Bragg-Sitton, L.L. Snead, Overview of the U.S. DOE Accident Tolerant Fuel Development Program, Report Number: INL/CON-13-29288 (Research Org.: Idaho National Lab. (INL), Idaho Falls, ID (United States), 2013) [Google Scholar]
  11. X. Wu, K. Shirvan, System code evaluation of near-term accident tolerant claddings during boiling water reactor short-term and long-term station blackout accidents, Nucl. Eng. Des. 356, 110362 (2020) [Google Scholar]
  12. S.-J. Han, K.-I. Ahn, An investigation of potential risks of nuclear system from hydrogen production, Nucl. Eng. Des. 270, 119 (2014) [Google Scholar]
  13. M. Steinbrueck, M. Grosse, C. Tang, J. Stuckert, H.J. Seifert, An overview of mechanisms of the degradation of promising ATF cladding materials during oxidation at high temperatures, High Temp. Corros. Mater. 101, 621 (2024) [Google Scholar]
  14. Z. Li, X. Wang, H. Chen, R. Zhang, T. Wei, L. Yao, P. Wang, Review on performance of chromium-coated zirconium and its failure mechanisms, Front. Nucl. Eng. 2, 1212351 (2023) [Google Scholar]
  15. K. Chang, F. Meng, F. Ge, G. Zhao, S. Du, F. Huang, Theory-guided bottom-up design of the FeCrAl alloys as accident tolerant fuel cladding materials, J. Nucl. Mater. 516, 63 (2019) [Google Scholar]
  16. F.J. Goldner, W. McCaughey, D.M. Wachs, D. Kamerman, C. Jensen, S.L. Hayes, A. Nelson, J. Harp, N. Capps, K. Linton, C. Petrie, T.A. Saleh, J.T. White, The U.S. Accident Tolerant Fuels Program – Update on a National Initiative (Research Org.: Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States), 2021) [Google Scholar]
  17. B. Qiu, J. Wang, Y. Deng, M. Wang, Y. Wu, S.Z. Qiu, A review on thermohydraulic and mechanical-physical properties of SiC, FeCrAl and Ti3SiC2 for ATF cladding, Nucl. Eng. Technol. 52, 1 (2020) [Google Scholar]
  18. P. Joshi, B. Kombaiah, M.N. Cinbiz, K.L. Murty, Characterization of stress-rupture behavior of nuclear-grade C26M2 FeCrAl alloy for accident-tolerant fuel cladding via burst testing, Mater. Sci. Eng.: A 791, 139753 (2020) [Google Scholar]
  19. T. Sand, A. Edgren, C. Geers, V. Asokan, J. Eklund, T. Helander, J.E. Svensson, L.G. Johansson, Exploring the effect of silicon on the high temperature corrosion of lean FeCrAl alloys in humid air, Oxid. Met. 95, 221 (2021) [Google Scholar]
  20. I.W. Ngarayana, Effect of Surface Oxidation in Cesium Chemisorption onto Nuclear Structural Materials (Nagaoka University of Technology, Nagaoka, 2022) [Google Scholar]
  21. I.W. Ngarayana, K. Murakami, T. Suzuki, T.-M.-D. Do, Role of solute titanium and oxidation in cesium chemisorption onto stainless steel, J. Nucl. Sci. Technol. 10 (2022) [Google Scholar]
  22. S. Nishioka, K. Nakajima, E. Suzuki, M. Osaka, An experimental investigation of influencing chemical factors on Cs-chemisorption behavior onto stainless steel, J. Nucl. Sci. Technol. 56, 988 (2019) [Google Scholar]
  23. I.W. Ngarayana, Cesium chemisorption onto stainless steel under simulated light water reactor severe accident, GND 26, 46 (2024) [Google Scholar]
  24. I.W. Ngarayana, K. Murakami, A. Rohanda, T. Suzuki, Interaction of cesium hydroxide with oxide layers under simulated light water reactor severe accident, Nucl. Sci. Eng. 198, 1 (2023) [Google Scholar]
  25. V. Asokan, J. Eklund, S. Bigdeli, T. Jonsson, The influence of Si on the primary protection of lean FeCrAl model alloys in O2 and O2+H2O at 600 °C–A microstructural investigation, Corros. Sci. 179, 109155 (2021) [Google Scholar]
  26. J. Eklund, A. Persdotter, V. Ssenteza, T. Jonsson, The long-term corrosion behavior of FeCrAl(Si) alloys after breakaway oxidation at 600 °C, Corros. Sci. 217, 111155 (2023) [Google Scholar]
  27. S. Djuliana, M. Meireni, E. Saragih, Andryansyah, P. Farihin, I.W. Ngarayana, Silicon-induced microstructural refinement in FeCrAl ODS alloys for accident-tolerant fuel applications, Nucl. Technol. 1 (2026) [Google Scholar]
  28. C.W. Bale, E. Bélisle, P. Chartrand, S.A. Decterov, G. Eriksson, A. Gheribi, K. Hack, I.-H. Jung, J. Melançon, A.D. Pelton, S. Petersen, C. Robelin, Recent developments in factsage thermochemical software and databases, in Celebrating the Megascale, edited by P.J. Mackey, E.J. Grimsey, R.T. Jones, G.A. Brooks (Springer International Publishing, Cham, 2014), pp. 141–148 [Google Scholar]
  29. C.W. Bale, E. Bélisle, P. Chartrand, S.A. Decterov, G. Eriksson, A.E. Gheribi, K. Hack, I.-H. Jung, Y.-B. Kang, J. Melançon, A.D. Pelton, S. Petersen, C. Robelin, J. Sangster, P. Spencer, M.-A. Van Ende, FactSage thermochemical software and databases, 2010–2016, Calphad 54, 35 (2016) [CrossRef] [Google Scholar]
  30. M.N. Gussev, K.G. Field, Y. Yamamoto, Design, properties, and weldability of advanced oxidation-resistant FeCrAl alloys, Mater. Des. 129, 227 (2017) [Google Scholar]
  31. H. Jia, Y. Wang, Y. Wang, L. Han, Y. Zhang, Z. Zhou, Recent progress on creep properties of ODS FeCrAl alloys for advanced reactors, Materials 16, 3497 (2023) [Google Scholar]
  32. P.K. Romano, N.E. Horelik, B.R. Herman, A.G. Nelson, B. Forget, K. Smith, OpenMC: A state-of-the-art Monte Carlo code for research and development, Ann. Nucl. Energy 82, 90 (2015) [CrossRef] [Google Scholar]
  33. G.L. De Stefani, J.M.L. Moreira, J.R. Maiorino, P.C.R. Rossi, Detailed neutronic calculations of the AP1000 reactor core with the Serpent code, Prog. Nucl. Energy 116, 95 (2019) [Google Scholar]
  34. M.B. Chadwick, M. Herman, P. Obložinský, M.E. Dunn, Y. Danon, A.C. Kahler, D.L. Smith, B. Pritychenko, G. Arbanas, R. Arcilla, R. Brewer, D.A. Brown, R. Capote, A.D. Carlson, Y.S. Cho, H. Derrien, K. Guber, G.M. Hale, S. Hoblit, S. Holloway, T.D. Johnson, T. Kawano, B.C. Kiedrowski, H. Kim, S. Kunieda, N.M. Larson, L. Leal, J.P. Lestone, R.C. Little, E.A. McCutchan, R.E. MacFarlane, M. MacInnes, C.M. Mattoon, R.D. McKnight, S.F. Mughabghab, G.P.A. Nobre, G. Palmiotti, A. Palumbo, M.T. Pigni, V.G. Pronyaev, R.O. Sayer, A.A. Sonzogni, N.C. Summers, P. Talou, I.J. Thompson, A. Trkov, R.L. Vogt, S.C. Van Der Marck, A. Wallner, M.C. White, D. Wiarda, P.G. Young, ENDF/B-VII.1 nuclear data for science and technology: Cross sections, covariances, fission product yields and decay data, Nucl. Data Sheets 112, 2887 (2011) [CrossRef] [Google Scholar]
  35. P.K. Romano, C.J. Josey, A.E. Johnson, J. Liang, Depletion capabilities in the OpenMC Monte Carlo particle transport code, Ann. Nucl. Energy 152, 107989 (2021) [CrossRef] [Google Scholar]
  36. C.A. Schneider, W.S. Rasband, K./W. Eliceiri, NIH image to ImageJ: 25 years of image analysis, Nat. Methods 9, 671 (2012) [CrossRef] [PubMed] [Google Scholar]
  37. E04 Committee Test Methods for Determining Average Grain Size [Google Scholar]
  38. R. Rosten, M. Koski, E. Koppana, A guide to the calculation of theoretical densities of crystal structures for solid oxide fuel cells, J. Undergrad. Mater. Res. 2 (2006) [Google Scholar]
  39. J.W. Arblaster, Selected Values of the Crystallographic Properties of the Elements Series (ASM International, 2018) [Google Scholar]
  40. S. Huang, E. Dolley, K. An, D. Yu, C. Crawford, M.A. Othon, I. Spinelli, M.P. Knussman, R.B. Rebak, Microstructure and tensile behavior of powder metallurgy FeCrAl accident tolerant fuel cladding, J. Nucl. Mater. 560, 153524 (2022) [Google Scholar]
  41. N. Wang, Y. Ji, Y. Wang, Y. Wen, L.-Q. Chen, Two modes of grain boundary pinning by coherent precipitates, Acta Mater. 135, 226 (2017) [Google Scholar]
  42. S.N. Naik, S.M. Walley, The Hall–Petch and inverse Hall–Petch relations and the hardness of nanocrystalline metals, J. Mater. Sci. 55, 2661 (2020) [Google Scholar]
  43. I. Ondicho, B. Alunda, K. Kamau, Solid solution strengthening in high-entropy alloys, in High Entropy Materials – Microstructures and Properties, edited by Y. Zhang (IntechOpen, 2023) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.